Table of Contents
Advertisement
8 Mounting Dimensions
Use the drawings in this appendix when bolting the printer to the work surface.
Bolt Printer to Work Surface
The BradyPrinter A5500 printer comes with threaded bolt holes on the bottom for table top mounting. If
the work surface vibrates or the printer will be placed on a moving cart, you may wish to stabilize it.
You will need four bolts with thread size 1/4-20.
To bolt the printer to a table or cart:
1. Use the dimensions in the following drawings to measure and mark the location of the bolt
holes on the work surface.
2. Drill appropriately sized holes in the work surface and bolt printer to work surface using four
1/4-20 bolts.
BradyPrinter A5500 User Manual
56
Advertisement
Table of Contents
