Load Supplies; Settings; Connection - Brady BradyPrinter A5500 User Manual

Load Supplies

Tap Load Supplies to install label supply or ribbon, or to clear a jam.
The following table describes the functions on the Load Supplies menu.
Button
Shuttles the print and flag mechanism back, tilts the print head open and displays
Load
instructions for loading media. For detailed instructions on how to install label supply,
Supply
see
IMPORTANT: After feeding label supply, be sure to remove the dispensed label.
Failure to do so will jam the print mechanism.
Shuttles the print and flag mechanism back, tilts the print head open and displays
Load
instructions for loading ribbon. For detailed instructions on how to install the ribbon,
Ribbon
see
Shuttles the print and flag mechanism back, tilts the print head open and displays
Clear Jam
instructions for clearing the jam.
IMPORTANT: After feeding media, be sure to remove the dispensed label. Failure to
do so may jam the print mechanism again.

Settings

Tap Settings to see printer information and to change operational settings for the printer.
The following sections describe each item in the Settings menu. As you navigate through the menus,
remember to use the back button to return to the previous menu.

Connection

Use to set the printer name (see
with the printer (see
BradyPrinter A5500 User Manual
"Load Label Supply" on page
"Load the Printer Ribbon" on page
"Printer Name" on page
"Load Software and Connect Printer" on page
Description
17.
23.
13) and configure network communication
15).
General Operation
Functions
31