Accessories; Specifications And Dimensions - ADC FPL Series User Manual

ADCP-90-328 • Issue 2 • November 2005

2 ACCESSORIES

The following accessory items may be ordered separately for FPL panels:
• Single and dual splice trays (for types, see Splice Type in
• Additional kits for clamping and grounding cables
• Key locks for front and rear doors
• Buildout attenuators (ST and biconic)
• Bulkhead attenuators (ST, SC, D4, FC, and biconic)

3 SPECIFICATIONS AND DIMENSIONS

Table 1 lists specifications for the FPL modules.
PARAMETER
Common to All Panels
Rack mounting
Hole spacing
Recess options
Connector types
Pigtail type
Splice type
Pre-termination (optional) cable types
12/24 Position Panel (1RU)
Dimensions (H x W x D)
Capacity
24 Position Panel (3RU)
Dimensions (H x W x D)
Capacity
Page 8
© 2005, ADC Telecommunications, Inc.
Table 1. FPL Modules Specifications
SPECIFICATION
19-inch (48.26 cm) or 23-inch (58.42 cm)
EIA or WECO
4-inch (10.16 cm) or 5-inch (12.7 cm) recess
Multimode SC, SC duplex, ST
Singlemode FC, FC (zirconia adapter), FC (8
o
nia adapter), SC (8 polish), SC duplex, ST
o
E-2000 (8 polish), E-2000 (flat polish), LX.5
Stranded or ribbon
Bare fusion, heat shrink fusion, mechanical, rotary, FibrLok, Raychem
Universal (R), Nortel, AFL
Multimode IFC stranded 62.5/125;
Singlemode IFC stranded, IFC plenum stranded, OSP single armor
stranded, indoor-outdoor, OSP dielectric stranded, IFC Maxi-Strip,
IFC ribbon, OSP single armor ribbon, OSP dielectric ribbon
1.72 inch x 17.0 in. x 11.48 in.
(4.4 cm x 43.2 cm x 29.2 cm)
12 or 24 termination positions
©
LX.5 and LC connectors double the termination capacity
5.0 inch x 16.4 in. x 12.0 in.
(12.7 cm x 41.7 cm x 30.5 cm)
24 termination positions
©
LX.5 and LC connectors double the termination capacity
Table 1 below)
© ©
, LX.5 , and LC;
o
polish), SC, SC (zirco-
© ©
, ST (zirconia adapter),
©
, LC