MUTOH ValueJet VJ-1626UH Operation Manual page 188

4 Handling the printer
4. Set the media holder plates by sliding them from both sides of the platen.
NOTE
• Do not use the media holder plates for media whose thickness is 500 m (0.5 mm) or thicker.
The media holder plate may interfere with the print head.
3
4
2
1
No.
1
2
3
4
5. After installing the media holder plates, make sure that they do not interfere with the media as it is
fed through the printer.
CAUTION
• If a media jams when using the media holder plates, the plates may be deformed.
When the media holder plates are deformed,
• Do not remove the clogged media by force.
• Stop using the printer.
• Using the printer with deformed media plates may damage the grid roller or print
heads.
Contact your local MUTOH dealer.
NOTE
• If there is interference with the media as it is fed through the printer after the media holder plates
have been installed, the media holder plates should not be used.
186
Roll media
Media holder plate
Media loading position
Platen
VJ-1626UH OPERATION MANUAL
Name
3
4
2
1
4.2 Media