Pre-Installation Inspection - Wayne-Dalton Prodrive 3220C Installation Instructions And Owner's Manual

PRE-INSTALLATION INSPECTION OF YOUR GARAGE DOOR
®
PRIOR TO PRODRIVE OPENER INSTALLATION
®
To ensure your new Prodrive opener works as intended, your garage door must be properly
installed and balanced.
Before installing your garage door opener, open and close you door manually to ensure it
operates smoothly from top to bottom. A properly balanced door should not take a lot of
effort to open or close by hand. The door should stay in the open and in the closed
position without drifting down or creeping up. If a door opens fast, the door may need spring
tension reduced. If the door drops fast, the door may need spring tension increased.
®
If the door operates properly, then proceed to your Prodrive installation manual for
®
instructions on how to install the Prodrive garage door opener.
If the operation of the door does not meet these requirements, adjust the spring
balance per your door's installation manual or call a professional installer to make
®
adjustments before installing Prodrive .
Instruction manuals are available for download on.
also fi nd the location of your nearest professional dealer.
Once the door is properly balanced and operates smoothly, you may proceed with the
®
installation of your Prodrive garage door opener.
II
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need