Change Site Scheduling; Change Site Information - 3M Drive-Thru G5 Installation Manual

3M™ Drive-Thru System Model G5
N. Change Site Scheduling
The site schedule is the calendar of store open and closing times.
i
IMPORTANT NOTE
All timekeeping is done using a 24-hour clock (e.g., 6:00 p.m. appears as 18:00).
Regular Site Schedule
The regular site schedule is the opening and closing times for each day of the week and the times assigned as "Day" and "Night," which
determine when the day and night volume settings change.
Perform the following procedure to set the regular site schedule:
• Enter the Basestation configuration mode, see "Enter Configuration Mode" on page 28, and choose 1 System Menu.
• Navigate to 10 Site Scheduling > Regular Site Schedule.
• Change the value for each day of the week and each of the four defined fields (Open, Day, Night, and Close).
(Press the directional arrows to scroll up and down the list).
i
IMPORTANT NOTE
The Greeter will not play messages while the store is closed, except for the (built-in or custom) store closed message.
Holiday/Exception Schedule
The holiday/exception schedule can be used to identify up to 12 days in the year on which the store schedule is different than it would have
been otherwise. The holiday/exception schedule should be updated at least once a year to ensure it conforms to the current year's calendar.
Perform the following procedure to set the holiday/exception schedule:
• Enter the Basestation configuration mode (see "Enter Configuration Mode" on page 28) and choose 1 System Menu.
• Navigate to 10 Site Scheduling > Holiday/Exception Schedule.
• For each day that needs a non-typical schedule, enter the three-letter month and two-digit date under Date, then change the open
and close times on the line to the right of the date.
(Press the directional arrows to scroll through the fields).
O. Change Site Information
Site information is useful for warranty registration and to support service calls. All information is entered free-format using the numeric
keypad. To type upper case letters, use the Shift key.
Perform the following procedure to change the site information:
• Enter the Basestation configuration mode (see "Enter Configuration Mode" on page 28) and choose 1 System Menu.
• Navigate to 11 Site Information.
• For each field that needs to be modified, enter the appropriate data.
(Press the directional arrows to scroll through the fields).
42
Installation Instructions G5 - Revision C, September 2019