Install The Vehicle Detector(S); Assemble The 3M™ Drive-Thru Headset G5 - 3M Drive-Thru G5 Installation Manual

3M™ Drive-Thru System Model G5
F. Install the Vehicle Detector(s)
Follow the instructions provided with the vehicle detectors for installing the detector loop(s), speakers, and microphones.
For information on wiring and configuring the vehicle detector(s) to the Basestation, see "Basestation to Component Wiring" on page 20.
For information on installing the vehicle detector circuit boards in the Basestation, see "Installing Accessory Boards in the Basestation" on
page 23.
G. Assemble the 3M™ Drive Thru Headset G5
The components that make up a 3M™ Drive-Thru Headset G5 are packaged and shipped as individual parts:
• 3M™ Control Pod G5 (includes a pack of ID Tags)
• 3M™ Carrier G5 (includes a pack of ID Tags) and
• 3M™ Battery G5
Use the instructions below to assemble these parts to make a fully functional headset.
Installing ID Tags
In 3M™ Drive-Thru systems with V5 release software Reminder and Alert features installed, installing ID tags on each headset makes it easy
to:
• Assign and identify headsets to crew members
• Attend to hygiene concerns
Each Control Pod and Carrier shipped has a bag enclosed with 8 different colored tags that can be interchanged by the staff. The Control
Pod and Carrier come pre-installed with Black ID Tags. The colors included in the bag are:
• Red, Green, Blue, Yellow, Purple, Black, White, Orange, Pink
Follow the procedure below to install ID Tags:
• Control Pod
Remove the existing ID Tag from the Control Pod and replace with the color of your choice. Gently apply pressure (using the tip
of a ballpoint pen, for example) so the ID Tag securely holds its position.
• Carrier
Flip open the Head Pad as shown below.
From the outside, gently push the ID Tag out. Replace this Tag with one of your choice from the bag of ID Tags.
Gently apply pressure (using the tip of a ballpoint pen, for example) so the ID Tag securely holds its position.
Close the Head Pad.
Installation Instructions G5 - Revision C, September 2019
Figure 8.
Installation Instructions G5
Revision C, September 2019
13