Change Noise Reduction Level; Set System Date And Time; Change Global Settings - 3M Drive-Thru G5 Installation Manual

3M™ Drive-Thru System Model G5
I. Change Noise Reduction Level
There are several ways to improve the sound quality at the headset using the following settings.
Inbound Microphone Noise Reduction Level
The inbound microphone noise reduction level setting reduces the effects of any ambient background noise at the customer order point,
to make it easier to hear the drive-thru customer.
Perform the following steps to increase or decrease the noise reduction level:
• Enter the Basestation configuration mode (see "Enter Configuration Mode" on page 28) and choose 1 System Menu.
• Make a new selection for 05 Noise Reduction > Inbound Mic Noise Reduction Level. Options are Off, Min, Low, Med, Hi,
and Max. You may need to experiment for a setting that works best for your ambient noise environment.
Acoustic Echo Canceller
Perform the following procedure if there is a delayed repetition (echo) of the outbound sound:
• Enter the Basestation configuration mode (see "Enter Configuration Mode" on page 28) and choose 1 System Menu.
• Make a new selection for 05 Noise Reduction > Acoustic Echo Canceller. Options are Min, Low, Med, and Max. You may need
to experiment for a setting that works best for your ambient noise environment and staff.
J. Set System Date and Time
Perform the following procedure to set the system time and date.
• Enter the Basestation configuration mode (see "Enter Configuration Mode" on page 28) and choose 1 System Menu.
• Change the date and time values for 06 Set Time & Date in the Time and Date fields as required. Use the arrows to scroll from
one field to the next and type new values over the existing data in the formats shown in parentheses:
• HH = Hours (01 to 24, e.g., 6:00 pm is 18)
• MM = Minutes (01 to 60)
• SS = Seconds (01 to 60)
• MMM = Month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, or Dec)
• DD = day (01 to 31)
• Year = Last two digits of the year (00 to 99, 20 is fixed and cannot be changed)
K. Change Global Settings
Global settings are an assortment of options that you must choose based upon the basic configuration of your system.
Text and Audio Prompts Language
You can choose between English, Spanish, German, and French language for all text and audio prompts, which is essentially all of the factory
prerecorded information coming from the Basestation and all of the printed text on the display.
i
IMPORTANT NOTE
Changing the text and audio prompt language will also change the language of the headset messages.
Perform the following procedure to change the text and audio prompts:
• Enter the Basestation configuration mode (see "Enter Configuration Mode" on page 28) and choose 1 System Menu.
• Change the value for 07 Global Settings > Text & Audio Prompts Language to English, Español, Deutsch, or Français.
Drive-Thru Audio Duplex Mode
The system can function using half-duplex or full-duplex modes. Choosing between the two modes is based upon the desired operation.
38
Installation Instructions G5 - Revision C, September 2019