Section 6. Cleaning And Maintenance; Cleaning The Filter Canister - Zodiac VORTEX-PRO EC15 Series Owner's Manual

Robotic pool cleaner
Table of Contents

Advertisement

3.
Press
delete programming for the selected day.
Press
To Cancel All Programs:
1.
Press
the Programming Menu.
2.
Press and hold
programming in the control box.
The display will turn off for one (1) second.
When all programs are cancelled, the current
day and time is displayed on the screen with
no days of the week lit.
16
and hold for 3 to 5 seconds to
to exit.
to make sure you have exited
to delete all
Section 6. Cleaning and
To avoid electric shock and other hazards which
could result in permanent injury or death, disconnect
(unplug) the control box from the power source
before performing any cleaning and maintenance.
6.1

Cleaning the Filter Canister

The filter canister should be cleaned at the end of each
cycle.
1.
Make sure the control box cable is disconnected
from the electrical outlet or the floating cable
has been disconnected from the control box.
2.
Remove the cleaner from the water and let
the remaining water drain by maintaining the
cleaner in the vertical position.
3.
Set the unit on its wheels.
4.
To remove the filter canister assembly from the
cleaner, follow steps 5 through 8.
5.
Push the cover lock (1) and lift the cover (2)
until it is secured in the vertical position.
(Figure 27).
Figure 27. Lift Cleaner Cover
6.
Remove the filter canister assembly from the
body (3), as shown in Figure 28.
H0516700_REV C
Maintenance
WARNING
1
2

Advertisement

Table of Contents
loading

Table of Contents