Part Identification Chart - Weider 831.150720 User Manual

Part Identification Chart

This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part. The second number refers to the quantity needed for assembly.
Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in
the parts bags, check to see if it has been pre-assembled.
M8 x 40mm Carriage Bolt (26)Ñ2
M6 x 38mm Screw (16)Ñ4
M6 x 16mm Screw (15)Ñ4
M8 x 50mm Bolt (17)Ñ1
M8 x 55mm Bolt (27)Ñ2
M10 x 60mm Bolt (18)Ñ1
M8 x 65mm Bolt (14)Ñ4
7mm Spacer (24)Ð1
M6 Washer (25)Ñ4
M8 Washer (29)Ñ4
M8 Nylon Locknut (13)Ñ9
M10 Nylon Locknut (19)Ñ1
5