Scanem-Qc Electromagnetic Near-Field Probe Kit Controls And Connector - 3M ScanEM-QC CTK019 User Manual

3M ScanEM-QC Electromagnetic
™
Near-Field Probe Kit Controls
and Connector
Antenna Level Dial
This is the Adjusts the
ScanEM-QC's reference level
antenna. of the EM field.
Point it at the The level dial
area or the is used to set
the "normal
object you
want to check. background
The closer the level." It also
antenna is to works as a
the object, the squelch control.
more accurate
the test result.
Two AAA alkaline batteries are already installed in each
ScanEM-QC Probe. See page 28 for instructions on
how to replace the batteries.
6
Sound Switch
Turns sound
indicator On
and Off.
Stand-alone operation only
The stronger
the emission
level, the higher
the pitch of
the sound.
1
LED Level Bar Output
Indicates Provides AC and
relative EM field DC output.
strength.
Five LEDs SMB male
indicate relative connector.
field strength. Connects
The LEDs can ScanEM-QC
be used with or Probe to a
without sound. spectrum
analyzer,
oscilloscope,
frequency
counter,
multimeter
and other
instruments
Operate Buutton
Keep this button
depressed when
you are using
your ScanEM-QC
Probe.
ScanEM-QC
Probe is "ON"
as long as
this button is
held down.