3M ScanEM-QC CTK019 User Manual page 5

The 3M ScanEM-QC Electromagnetic Near-Field Probe provides both AC
™
and DC outputs. The ScanEM-QC Probes serve as: broadband amplified
probes for a spectrum analyzer, as non-contact high-bandwidth voltage
(3M ScanEM-EQC Probe) and current (3M
™
for an oscilloscope and as broadband field strength probes for a multimeter.
The ScanEM-QC Electromagnetic Near-Field Probes can:
‰ Provide means of testing each and every product you ship to a customer
for compliance with emission regulations
‰ Predict radiated EMC test results
‰ Pre-test your product prior to an official compliance test in order to
identify potential problems early
‰ Quickly troubleshoot a product that has failed a compliance test
‰ Find EM leakage on enclosures, cables and connectors
‰ Find sources of EM interference
‰ Show the presence of a high-frequency signal on a cable or wire
without contact
‰ Observe ESD Events both in the air and in the cables and ground planes
using oscilloscope
‰ Work as amplified near-field probes when connected to a
spectrum analyzer
‰ Work as non-contact high-bandwidth voltage and current
oscilloscope probes
‰ Work as field-strength probes when used with a multimeter
ScanEM-HQC Probes) probes
™
5