Fujitsu ETERNUS AB Series Maintaining Hardware page 25

Procedure
1. Reinstall the cover on the controller canister by sliding the cover from back to front until the button clicks.
2. Turn the controller canister over, so that the removable cover faces down.
3. With the cam handle in the open position, slide the controller canister all the way into the controller shelf.
Controller canister
Controller canister
4. Move the cam handle to the left to lock the controller canister in place.
5. Install the SFPs from the original controller in the host ports on the new controller, and reconnect all the
cables.
If you are using more than one host protocol, be sure to install the SFPs in the correct host ports.
6. If the original controller used DHCP for the IP address, locate the MAC address on the label on the back of
the replacement controller. Ask your network administrator to associate the DNS/network and IP address
for the controller you removed with the MAC address for the replacement controller.
Cam handle
Cam handle
| Controllers |
25