Fujitsu ETERNUS AB Series Maintaining Hardware page 88

Hide thumbs Also See for ETERNUS AB Series:
Table of Contents

Advertisement

Controller canister
The following figure is an example of an HB5200 controller shelf:
Controller canister
3. Move the cam handle to the left to lock the controller canister in place.
4. Reconnect all the cables you removed.
Attention: Do not connect data cables to the new HIC ports at this time.
5. (Optional) If you are adding HICs to a duplex configuration, repeat all steps to remove the second
controller canister, install the second HIC, and reinstall the second controller canister.
What to do next
Go to
Place controller online
Cam handle
Cam handle
(duplex).
 |  Host interface cards  |
88

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus hb seriesEternus hb5000Eternus hb2000

Table of Contents