Step A - Preparing The Mailing System - quadient IS-240 Installation Manual

Step A – Preparing the Mailing System
1.3
1
A1 – Installing Postage Meter (PSD)
The Meter contains accounting and credit information.
Turn the Mailing System on its back.
•
Remove PSD from the packaging.
•
Write down PSD No: (N33xxxxxx).
•
You will need it at step C .
10
Step A – Preparing the Mailing
System
Do not connect the Power Supply to the System before
instructed.
You may damage equipment .
Open the PSD cover located under
•
the Mailing System.
Insert PSD into the Mailing System,
•
by positioning it vertically, with the
contacts down and facing to the rear,
and the labels towards you.
Close PSD cover.
•