Specifications - Omron G9SX Series Manual

Specifications

■ Ratings/Characteristics of Non-contact Door Switches
Item
Operating distance OFF → ON
Operating
characteristics
Operating distance ON → OFF
(See note 1.)
Differential travel (max.)
Influence of temperature (max.)
Ambient operating temperature
Ambient operating humidity
Insulation resistance (between charged parts and case) 50 M Ω max. (at 500 VDC)
Dielectric strength (between charged parts and case)
Vibration resistance
Shock resistance
Degree of protection
Material
Mounting method
Terminal screw tightening torque
Power consumption
Auxiliary outputs (See note 2.)
LED indicators
Connection cables
Number of connectable switches (See note 3.)
Weight
Note: 1. This is the distance where the switch operates from OFF to ON when approaching and the distance where the switch operates from ON
to OFF when separating when the switch and actuator target marks are on the same axis, and the sensing surfaces coincide.
2. Turns ON when the actuator is approaching.
3. For details, refer to item 5 on page 29.
Model
5 mm min.
15 mm max.
20% of operating distance
± 20% of operating distance at 23 ° C, within temperature range of − 10 to 55 ° C
− 10 to 55 ° C (no icing or condensation)
25% to 85%
1,000 VAC for 1 min
10 to 55 to 10 Hz (single amplitude: 0.75 mm, double amplitude: 1.5 mm)
300 m/s
IP67
PBT resin
M4 screws
1 N·m
0.6 W max.
24 VDC, 10 mA (PNP open-collector outputs)
Actuator not detected (red); actuator detected (yellow)
2 m, 5 m
30 max. (wiring length: 100 m max.)
Switch: approx. 145 g, actuator: approx. 20 g (D40A-1C2)
Compact Non-Contact Door Switch
D40A-1C@
2
min.
D40A/
Flexible Safety Unit
G9SX-NS
9