Filtec FT-70 Operation Manual page 66

98
99
100
108
109
111
112
113
114
116
117
118
119
120
121
123
124
125
126
* Activates alarm only when the Beacon Status function is set for High Priority Only.
Industrial Dynamics Company, Ltd. Document 40274-0600
The number of dud containers in the series alarm was exceeded.
The number of dud containers in the series alarm was exceeded.
Dud signal was too short for dud reference diameter.
Dud sensor signal late or container edge not found.
Dud sensor signal early or container edge not found.
Dud inspection window length exceeded.
Dud reference diameter calibrated larger than inspection window.
Possible sliding container or bulged end. Missed leading reference.
Possible sliding container or bulged end. Missed trailing reference.
Dud reference point less than 3/4 calibrated reference diameter.
Modbus Serial Interface Framing Error
Modbus Serial RX Overrun Error
Modbus Serial Parity Error
Modbus Serial RX Receive Rate Error
Modbus CTS Line Rate Error
X-ray Status Turned Off
X-ray Source Disabled
X-ray Source Malfunction Detected
X-ray Source Warming Up For 3 Minutes
Chapter 4: Diagnostics and Troubleshooting
4-5