Connecting And Playing Back From A Computer (Usb-Dac) - Marantz HD-AMP1 Owner's Manual

Contents Connections
Connecting and playing back from a
computer (USB-DAC)
You can enjoy high-quality audio playback from the D/A converter built in
to this unit by inputting music files into this unit from a computer via USB
connection.
Before USB connecting this unit to your computer, install the driver
0
software in your computer.
Drivers do not need to be installed for Mac OS.
0
Also, you can use whichever commercially available or downloadable
0
player software you like to playback files on your computer.
o Computer (system requirements)
OS
Windows 7, Windows 8, Windows 8.1 or Windows 10
0
Mac OS X 10.9, 10.10 or 10.11
0
USB
USB 2.0: USB High speed/USB Audio Class Ver.2.0
0
NOTE
0 This unit was checked the operation using the system requirements by us, but
it does not guarantee the operation of all systems.
Front panel Display
Playback Settings
Windows OS Installing the dedicated driver (v p. 31)
Mac OS
o Installing the dedicated driver
(Windows OS only)
n Installing the driver software
1
Disconnect the USB cable between your PC and the
unit.
2
Download the dedicated driver from the "Download"
section of the HD-AMP1 page of the Marantz website
onto your PC.
3
Unzip the downloaded file, and double-click the exe
file.
31
Rear panel
Tips
Audio Device Settings (v p. 38)
The driver software cannot be installed correctly if your PC is
0
connected to the unit by a USB cable.
If the unit and your computer are connected by a USB cable and
0
the computer is switched on before installation, disconnect the
USB and restart the computer.
Remote Index
Appendix