Blu-Ray Disc Player; Cd Player; Playback Settings; Network Audio Player - Marantz PM8006 Owner's Manual

Contents Connections

Connecting a playback device

You can connect turntables, tuners, Blu-ray disc players, network audio players and CD players to this unit.
This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving
coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer.
If you set this unit's input source to "PHONO" and you accidentally increase the volume without having a turntable connected, you may hear a hum noise
from the speakers.
AUDIO
OUT
NOTE
0 The earth terminal (SIGNAL GND) of this unit is not for safety grounding purposes. If this terminal is connected when there is a lot of noise, the noise can be reduced. Note
that depending on the turntable, connecting the ground line may have the reverse effect of increasing noise. In this case, it is not necessary to connect the ground line.
Front panel Rear panel
Playback
Tuner
Turntable
AUDIO
OUT
R L
R L
GND
R
L
L
R
Remote control
unit
Settings
Network audio
Blu-ray disc
player
player
AUDIO AUDIO
OUT OUT
R L R L
R L R L
R R
L L
20
Index
Tips Appendix

CD player

AUDIO
OUT
R L
R L
R
L