Table of Contents
Advertisement
FS3000LED
Installation
CLAMP INSTALLATION
This fixture features a mounting clamp attachment point, which is located on the mounting yoke,
as well as a safety cable rigging point, located near the display screen (see the illustration below).
When mounting the fixture to a truss or any other suspended or overhead installation, be sure to
secure an appropriately rated clamp (not included) to the clamp attachment point and attach a
separate SAFETY CABLE of the appropriate safety rating to the safety cable rigging point.
SAFETY CABLE
ALWAYS ATTACH A SAFETY
CABLE WHENEVER INSTALLING
THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE
THAT THE FIXTURE WILL NOT
FALL IF THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working
load limits, understanding the installation material being used, and periodic safety inspection of all
installation material and the fixture itself. If you lack these qualifications, do not attempt to perform
the installation yourself. Improper installation can result in bodily injury.
ADJ Products, LLC - www.adj.com - FS3000LED User Manual Page 9
Advertisement
Table of Contents
