Advertisement
Available languages
Available languages
2
TOUCH THE SAME MEMORY KEY AGAIN.
The latest reading saved in the selected bank is
displayed.
The display at the top shows memory number,
measurement date and time alternately. The latest
reading is displayed as memory "No. 1".
The results are recalled from the latest to the oldest
with operation of MEMORY KEY.
The bigger memory number indicates the older number.
SWITCHING MEMORY BANKS
Touching MEMORY KEY [2] at display of reading in the bank [1] will switch the display
to reading in bank [2] and touching MEMORY KEY [1] again will return to the display of
result in the bank [1].
3
TURN OFF THE MONITOR.
T R O U B L E S H O O T I N G
Blood pressure is extremely high or low.
???
Measurement is not taken with correct posture or the cuff is wrapped incorrectly.
Reconfirm the measurement procedures.
The reading was effected from moving or talking. Remain still and quiet
during measurement.
Measurement was taken right after exercise or other activities influencing the
reading. Measure again after resting for more than 5 minutes. See TIPS
ON TAKING YOUR BLOOD PRESSURE.
Touch "START/STOP" KEY.
Even if you do not turn off the monitor, it displays the result for approximately 30 seconds and
will turn off automatically.
MEMORY
NUMBER
DATE
TIME
???
???
-11-
DELETING SAVED READINGS
Deleting individual readings
Touch the memory key to display the latest set of readings. Then scroll through the
readings by repeatedly touching the memory key until you reach the reading to be
deleted. Then hold down memory key for 4 seconds until display flashes and continue
to hold down key for about 4 seconds until reading is deleted and the display is
cleared [
].
Deleting all the readings in a memory bank.
Select and display the average readings for the memory bank to be deleted.
Then delete by holding down the memory key continuously until the display is
cleared [
] as described in the sentence above for the deletion of individual
readings.
Measured values vary all the time.
Mental and physical condition or measurement condition is influencing blood
pressure. Make measurement under the same condition.
Measured value is different from that taken at a hospital.
Mental condition such as nervousness at a hospital or relaxed feeling at home is
influencing blood pressure. Take records of blood pressure taken at home
and consult with your doctor.
Advertisement
