Safety Instructions For Maintenance; Possible Malfunctions - Bartscher MX 250 Instruction Manual

o In case of longer breaks in use cover all steel areas (especially stainless steel)
with large amount of vaseline oil using the cloth in order to protect them with
additional layer. Parts should be stored wrapped in soft, lint-free cloth.

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

Problem
The device does
not work: knife
does not rotate or
cuts incorrectly
Interruption
during work
Cause
• No power.
• The device is not
connected to the power
supply.
•
The ON/OFF switch is
damaged.
• Thermal switch tripped due
to too long operation /
overload.
•
It is not possible to identify
the cause.
Solution
• Check and restore the
power supply.
• Connect the plug to the
electric socket.
•
Contact the service
company.
• Wait for the device to cool
and restart work.
•
Contact the service
company.
- 31 -