6.3 Safety instructions for maintenance
o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
7. Possible Malfunctions
PROBLEM
No power.
Unit does not
work
Unit is loud.
Unit overheats.
POSSIBLE CAUSE
•
Plug not properly plugged
into socket
•
Power cord damaged
•
Mini-switch is damaged
•
The protective cover has
not been properly
mounted, the bowl handle
has not been raised or the
safety lever has not been
closed.
•
Speed not set
•
Bowl and attachment
improperly mounted
•
Work surface is uneven
•
Worn bearing
•
Damaged or worn gears
•
Overheated motor
SOLUTION
•
Insert plug into socket
•
Contact a sales agent
•
Contact a sales agent
•
Mount the protective cover
properly, raise the bowl
handle and close the safety
lever at the left and right
sides.
•
Set the speed
•
Check that the bowl and
attachment are properly
mounted
•
Place unit on an even work
surface
•
Contact a sales agent
•
Contact a sales agent
•
Check amount of dough
and speed
•
Check electricity levels
- 37 -