Safety Instructions; Persons Responsible For Safety; General Safety Instructions; Safety Information For The Timken C-Power Multi-Point Lubricator - Timken C-POWER Series Operating Manual

2.

SAFETY INSTRUCTIONS

2.1

Persons responsible for safety

■ The operator or maintenance supervisor must ensure:
That all relevant instructions and regulations are followed.
●
● That only qualified personnel work with and on the C-Power.
That unauthorized personnel are not allowed to work with and on the C-Power.
●
That safety regulations are followed when mounting the lubricator or during maintenance.
●
2.2

General Safety Instructions

■
All safety instructions must be followed, even if not expressly outlined in this manual.
Please contact Timken Customer Service with questions or problems.
■
At the time of delivery, the C-Power is considered to be safe to operate.
■
The possibility of accidents and or/injury increase when:
Unqualified personnel operate the C-Power.
●
The lubricator is used inappropriately.
●
The lubricator setting/variation is incorrect.
●
The C-Power is opened by force while in operation.
●
The C-Power is not mounted with the Timken mounting device.
●
The tube connection to the lubrication point is not attached correctly.
●
■
Operate the C-Power only when it is in perfect working condition.
■
Retrofitting, reconstructing or otherwise changing the lubricator is prohibited. Timken
must be consulted before any changes are made.
■
Only original tube connections and connectors from Timken can be used on or with the
lubrication system. These will withstand high pressure up to 360 psi (25 bar).
■ Ambient media, especially chemically aggressive substances, can attack seals and plastic.
2.3 Safety Information for Timken C-Power Multi-Point Lubricator
Safety During Installation and Maintenance
■ All work stations and traffic routes must be safe and free of debris.
■
Follow all regulations and guidelines when installation or maintenance is performed,
particularly under conditions in which there is a risk of falling objects.
■ Observe all safety and operating instructions when the C-Power is installed or serviced.
Safety When Handling the C-Power LV-Unit
■
Avoid contact between lubricant and eyes, skin and clothing.
■
Avoid ingestion of lubricant.
■ Prevent lubricant from spilling into soil or sewer system.
■
Observe safety data sheets.
■
Immediately clean lubricant from floors to avoid slipping accidents.
■ Use only original C-Power LV-units from Timken.
Safety when Handling Batteries
■
Avoid contact between battery substances and eyes, skin and clothing.
■
Avoid ingestion of any leaking battery substances.
■ Observe safety data sheets.
■
Do not expose batteries to extreme heat and do not throw into open fire.
■
Do not recharge batteries.
■ Observe regulations for battery disposal.
■
Use only original battery sets from Timken.
6