Overview Subtab - Agilent Technologies 16718A Help Volume

Trigger Position Lets you specify where the sample that triggered the
Count
Arm out from:
Intermodule
Control
See Also
"To specify the sample period" on page 38
"To set acquisition memory depth" on page 49
"To specify the trigger position" on page 48
"To count states or time" on page 66
"To cross-trigger with another instrument" on page 107

Overview Subtab

This tab gives a picture of the trigger sequence.
See Also "To view a picture of the trigger sequence" on page 77
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
analyzer should appear among all the other samples that
are stored in acquisition memory.
(State mode only). Lets you save time or state count
information with the captured data samples.
When two logic analyzers are turned on, this option lets
you choose which of them (or both) should drive the arm
signal.
Lets you configure multiple instrument measurements and
adjust the order of trigger arming, as well as compensate
for timing skew between modules.
Chapter 3: Reference
The Trigger Tab
155