Chapter 2: Task Guide
To select transitional timing or store qualified
(for example, Trigger or Goto), choose Insert ACTION, and choose Reset
occurrence counter.
See Also
"To specify a duration or occurrence count for events (timing mode)" on
page 78
To group events
When you are working with advanced trigger functions (or when you
break down other trigger functions) and there are multiple events in an
event list, you can specify their evaluation order by grouping the
events.
1. In the Trigger tab's Trigger Sequence area, select the If, If not, Else if, or
Else if not button, and choose Group events.
2. In the Group Events dialog, either select the Add parens button to group
events or select the Remove parens button to ungroup events.
3. Select the OK button.
To use named events
When you are working with advanced trigger functions (or when you
break down other trigger functions), you can name an event list and
use it later when inserting or replacing events.
To give an event list a name
1. In the Trigger tab's Trigger Sequence area, select the If, If not, Else if, or
Else if not button, and choose Name event list.
2. In the Name Event List dialog, enter the name and select the OK button.
To insert a named event
1. In the Trigger tab's Trigger Sequence area, select a label name button and
choose to insert or replace a Named event.
2. In the Named Event selection dialog, select the named event, and select
the OK button.
84
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com