What Is A Specification - Agilent Technologies 16718A Help Volume

- Altitude
- Vibration
Operating:
Nonoperating: Random vibration 5 to 500 Hz, 10 minutes per axis,
Reliability is enhanced when operating within the following ranges:
- Temperature
- Humidity
Storage
Store or ship the logic analyzer in environments with the following
limits:
- Temperature
- Humidity
- Altitude
Protect the module from temperature extremes which cause condensation
on the instrument.

What is a Specification?

A Specification is a numeric value, or range of values, that bounds the
performance of a product parameter. The product warranty covers the
performance of parameters described by specifications. Products
shipped from the factory meet all specifications. Additionally, the
products sent to Agilent Technologies Customer Service Centers for
calibration and returned to the customer meet all specifications.
Specifications are verified by Calibration Procedures.
What is a Calibration
Calibration procedures verify that products or systems operate within
Procedure?
the specifications. Parameters covered by specifications have a
corresponding calibration procedure. Calibration procedures include
both performance tests and system verification procedure. Calibration
procedures are traceable and must specify adequate calibration
standards.
Calibration procedures verify products meet the specifications by
comparing measured parameters against a pass-fail limit. The pass-fail
limit is the specification less any required guardband.
The term "calibration" refers to the process of measuring parameters
and referencing the measurement to a calibration standard rather than
the process of adjusting products for optimal performance, which is
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
40 degrees C (+104 degrees F)
Operating, to 4600 m (15,000 ft)
Non-operating, to 15,300 m (50,000 ft)
Random vibration 5-500 Hz, 10 minutes per axis,
approximately 0.2 g rms
approximately 2.41 g rms; and swept sine resonant
search, 5 to 500 Hz, 0.50 g (0-peak), 5-minute
resonant dwell at 4 resonances per axis.
+20 to 35 degrees C (+68 to 95 degrees F)
20% to 80% non-condensing
-40 to +75 degrees C
up to 90% at 65 degrees C
up to 15,300 meters (50,000 feet)
Chapter 3: Reference
Specifications and Characteristics
189