Agilent Technologies 16718A Help Volume page 188

1-card module
2-card module
3-card module
4-card module
5-card module
Probes (at end of flying lead set)
- Input Resistance:
- Parasitic Tip Capacitance:
- Minimum Voltage Swing:
- Minimum Input Overdrive:
- Maximum Voltage:
- Threshold Range:
- Power through pod cables:
State Analysis
- Maximum State Clock Speed:
- Maximum Memory Depth:
- *Minimum Setup/Hold Time:
- Minimum State Clock Width:
- Minimum Master-to-Master Clock:
- Minimum Master-to-Slave Clock:
- Minimum Slave-to-Slave Clock:
- State Clocks:
- State Clock Qualifiers:
- **Time Tag Resolution:
- Maximum Time Count Between States:
- **Maximum State Tag Count:
- Store qualification
* Specified for single-edge, single-clock acquisition.
Multi-edge setup/hold window is 3.0 ns.
** When all pods are being used, time or state tags halve the memory
depth.
Timing Analysis
Timing Zoom
- Sample Rates:
- Sample Period Accuracy:
- Channel-to-channel Skew:
- Time Interval Accuracy:
- Memory Depth:
Conventional Timing
- Maximum Sample Rate:
Half Channel
Full Channel
- Memory Depth:
Half Channel
Full Channel
- Sample Period Accuracy:
- Channel-to-Channel Skew:
- Time Interval Accuracy:
Transitional Timing
Maximum timing analysis sample rate:
Number of channels:
34 x
Maximum channels on a single time base and trigger:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifications and Characteristics
64 data, 4 clock
132 data, 4 clock
200 data, 4 clock
268 data, 4 clock
336 data, 4 clock
100 Kohm, +/- 2%
1.5 pF
500 mV peak-to-peak
250 mV
+/- 40 V peak CAT I
+/- 6.0 V, adjustable in 50-mV increments
1/3 amp per pod, not to exceed 1 amp total
333 MHz
8 M
4.5/-2.0 ns through -2.0/4.5 ns,
adjustable in 100-ps increments
1.2 ns
5.988 ns at 167 MHz
3.003 ns at 333 MHz
2 ns
5.988 ns at 167 MHz
3.003 ns at 333 MHz
4
4
4 ns
17 seconds
2e32
Default and per sequence level
2 GHz/1 GHz/500 MHz/250 MHz
+/- 50 ps
less than 1.0 ns
+/- (sample period + channel-to-
channel skew + 0.01% of time
interval reading)
16 K
667 MHz
333 MHz
16 M samples per channel
8 M samples per channel
+/- (100 ps + 0.01% of sample period)
less than 1.5 ns, typical
+/-( sample period + channel-to-
channel skew + 0.01% of time
interval reading)
For sample rates =>333 MHz: 34 x
Chapter 3: Reference
333 MHz
For sample rates <333 MHz:
(number of modules)
(number of modules) - 17
170 (5 modules)
187