Hardware Components; Front Panel Components - D-Link DXS-3610 Series Hardware Installation Manual

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide

2. Hardware Components

Front Panel Components

Rear Panel Components
Side Panel Components
Front Panel Components
The front panel features components like LED indicators, a Console port, an MGMT port, a micro-USB port, a reset
button, and a variety of Ethernet ports. These components are described in detail below.
This following table lists the front panel components on all the switches in the series:
Port
Console Port
MGMT Port
Micro-USB Port
Reset Button
Information Tag
This following table lists the front panel components unique to the DXS-3610-54T:
Port Type
RJ45 Ports
(1/10 Gbps)
QSFP28 Ports
(40/100 Gbps)
Description
The console port can be used to connect to the CLI of the Switch. This Out-Of-
Band (OOB) connection can be made from the serial port of an administrative node
to the RJ45 console port on the front panel of the Switch. The console cable
(included in the package) must be used for the connection.
The management (MGMT) port can be used to connect to the CLI or the Web UI of
the Switch. SNMP-enabled connectivity can also be made through this port. This
OOB connection can be made from a standard LAN adapter to the RJ45 MGMT
port on the front panel of the Switch. This connection operates at 10/100/1000
Mbps.
The micro-USB port provides additional storage space for firmware images and
configuration files that can be copied to and from the Switch. Only endpoint
devices like USB flash drives are supported.
The reset button can be used to reboot the switch or to reset the switch to its
factory default settings depending on how long this button is pressed.
• Press and hold for less than 5 seconds
This reboots the Switch. All unsaved configurations will be lost.
• Press and hold for between 5 and 10 seconds
This resets the software configuration on the Switch to the factory default
settings.
The sliding information tag is discretely located on the front panel, right next to the
QSFP28 ports, and contains the product code, hardware version, serial number,
and MAC address of the Switch. The QR code can be scanned to quickly obtain
the abovementioned information.
Figure 2-1 DXS-3610-54T Front Panel
Port Number Description
Ports 1 to 48 This switch is equipped with 48 RJ45 Ethernet ports that can
operate at 1 and 10 Gbps wire-speeds.
Ports 49 to 54 This switch is equipped with 6 QSFP28 ports that can operate
at 40 and 100 Gbps wire-speeds and support a wide
collection of QSFP+/QSFP28 transceivers.
2