Switch To End Node - D-Link DXS-3610 Series Hardware Installation Manual

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide

Switch to End Node

An end node is a generic name for edge networking devices that will be connected to this switch. Typical examples of
end nodes are Personal Computers (PCs), Notebooks, Access Points, Print Servers, VoIP Phones and more. Each
end node should be fitted with an RJ45 networking port. Normally, end nodes will connect to this switch by using a
standard twisted-pair UTP/STP network cable. When a successful connection is established, the corresponding port
light will illuminate and blink to indicate that network activity is taking place on that port.
The diagram below displays a typical end node connected to the Switch.
Figure 4-5 Switch to End Node
21