Installing The Switch In A Standard 19" Rack - D-Link DXS-3610 Series Hardware Installation Manual

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide
heat dissipation from and adequate ventilation around the Switch. Leave at least 10 cm (4 inches) of space at the
front, sides, and rear of the Switch for ventilation.

Installing the Switch in a Standard 19" Rack

This section is used to guide the user through installing the Switch into a switch rack. The Switch can be mounted in a
standard 19"(1U) rack using the rack mounting kit included in the package contents.
Fasten the frontal rack-mounting brackets to the front-sides of the Switch using the screws provided.
Figure 3-2 Attaching the frontal rack-mounting brackets
Figure 3-3 Frontal rack-mounting brackets attached
8