Automatic Control Functions; Foam Detection; Overflow Protection System; Dynamic Quantity Control - Hanseatic HWM6T214A2 User Manual

Page EN-18

Automatic control functions

Automatic control functions
The following functions run automatically. You
cannot change them.

Foam detection

The electronic foam detection makes sure
that more water is added to the first rinse cy-
cle for certain amounts of foam.

Overflow protection system

This system prevents the water from leaking
out over the dispensing drawer. As soon as
a certain water level is exceeded, the outlet
pump will automatically switch on.

Dynamic quantity control

If your washing machine is loaded up only
halfway or loaded with less laundry than
the highest capacity, the water consumption
and cycle duration reduce for certain cycles.
This helps you save energy. Also adjust the
amount of detergent accordingly.

Imbalance correction system

This system protects your washing machine
in the event of an imbalance that is too large
when spinning starts. This can happen with
small loads or with large individual pieces of
laundry. The laundry is distributed again and
the spin speed increased if the laundry distri-
bution is right.