Introduction; Product Description; Audience; Purpose - Eclipse AirHeat AH series Design Manual

Introduction

Product Description

Eclipse AirHeat Burners are line type burners ideal for
generating large volumes of clean, hot air. Applications
include ovens, dryers, fume incinerators, and similar
industrial equipment.
aluminum burner bodies and diverging stainless steel air
wings. The burner bodies supply fuel to the center of the
air wings. The air and fuel mixture inside the burner is
controlled to optimize emissions and efficiency.
AirHeat Burners are assembled from straight sections
allowing for customized inputs. An integral combustion air
blower can be ordered mounted on the back of the
burner's steel or stainless steel housing case. By
supplying the correct air volume and pressure to the
burner, the blower allows stable operation over a wide
range of duct velocities without installing a profile plate
around the burner.
Brackets are available for slot firing or duct mounting and
flanges are available for continuous flange mounting.
Right hand or left hand gas piping can be supplied with
BSP or NPT connections. A reduced port fuel control
valve can be supplied with a variety of control motor and
linkage options. Ignition can be by direct spark or by spark
ignited pilot. Flame rod flame supervision can be from
either or both ends. Several air flow switches are also
available factory mounted on the burner.
Burner less blower
with inlet gas piping
and fuel control valve
and continuous
mounting flanges
Burner less blower
with inlet gas piping
and fuel control valve
and spark ignited pilot.
Figure 1.1. AirHeat Burner
4
Burners are constructed
Burner with blower

Audience

This manual has been written for personnel already
familiar with all aspects of a gas burner and it's add-on
components, also referred to as the burner package.
of
These aspects are:
• Design / Selection
• Use
• Maintenance
• Safety
The audience is expected to be qualified and have
experience with this type of equipment and its working
environment.

Purpose

The purpose of this manual is to make sure that the design
of a safe, effective and trouble-free system is carried out.
AirHeat Documents
Design Guide No. 135
• This document
Datasheet Series No. 135
• Available for individual AirHeat models
• Required to complete installation
Installation Guide No. 135
• Used with Datasheet to complete installationn

Related Documents

• EFE 825 (Combustion Engineering Guide)
• Eclipse Bulletins and Information Guides: 710, 720,
732, 742, 760, 818, 832, 852, 854, 856, 610, 620,
630, 826, 820, 930, I-354
Eclipse AirHeat Burner, V2, Design Guide 135, 6/16/2010
1