Introduction; Product Description; Audience; Purpose - Eclipse Furnnox 210 Series Installation Manual

Introduction

Product Description

The Furnnox is a Low NOx nozzle-mix burner using
ambient or preheated combustion air with temperatures
up to 1100°F (600°C). The Furnnox burner is designed for
application on direct fired high temperature range, 1400°F
to 2800°F (760°C to 1540°C), furnaces.
By staging the combustion air the burner NOx emissions
are reduced compared to standard nozzle mixing burners.
Staging of the combustion air is achieved by secondary air
holes in the burner refractory block.
The Furnnox burner is designed for direct ignition and
flame supervision by UV scanner.
Standard
BLOCK UP
Figure 1.1. Standard & Insulated Furnnox Burner
4

Audience

This manual has been written for personnel already
familiar with all aspects of a gas burner and it's add-on
components, also referred to as the burner package.
These aspects are:
The audience is expected to be qualified and have
experience with this type of equipment and its working
environment.

Purpose

The purpose of this manual is to make sure that you carry
out the installation of a safe, effective and trouble-free
system.
Furnnox Documents
Installation Guide No. 210
Datasheet Series No. 210
Spare Parts List Series No. 210

Related Documents

Insulated
BLOCK DOWN
• Installation
• Use
• Maintenance
• Safety
• This document
• Available for individual Furnnox models
• Required to complete installation
• Recommended replacement part information
• EFE 825 (Combustion Engineering Guide)
• Eclipse Bulletins and Information Guides: 210, 610,
710, 720, 730, 742, 744, 760, 930, I-354
Eclipse Furnnox Burner, V1, Installation Guide 210, 2/14/2011
1