Operating Standards; Product Specifications; Environmental Conditions - Thermo Scientific Savant SpeedVac SPD140DDA Installation And Operation Manual

Operating Standards

Product Specifications

Operative Power*
Vacuum Chamber
Cover
Induction Motor
Bearings
Chamber temperature
Vacuum Level Control
Vacuum Ramp Setting
Weight
Dimensions (W x D x H)
Fuse
*Dependent upon ambient temperature, line voltage fluctuation, and load capacity.

Environmental Conditions

Indoor use only, in the absence of hoarfrost, dew, percolating water, rain and solar radiation.
Maximum altitude
Ambient temperature range
Humidity
Pollution degree
Main supply voltage fluctuations not to exceed ±10% of the nominal voltage.
Transient overvoltages per Installation Categories II.
SpeedVac™ SPD140DDA
115 VAC; 60 Hz; 6 amps
230 VAC; 50 Hz; 3 amps
®
TEFLON coated, chemical resistant aluminum casting, includes two built-in radiant
lamps
Heated cover - includes a safety interlock
Maintenance free
®
Acid resistant TEFLON
35°C to 80°C, 5°C increments
20 to 0.1 Torr in 0.1 increments
1 to 5
62 lbs
28 kg
14 in x 18 in x 14 in
36 cm x 46 cm x 36 cm
6 A, 250 VAC, Time-lag
3 A, 250 VAC, Time-lag
2000 meters above mean sea level
17°C to 32°C
20% to 80% non-condensing
2
bearings
Operating Standards | 3