STIEBEL ELTRON DHM 3 Operation And Installation page 37

InstallatIon
Installation


f Route the power cable through the cable entry in the back f
panel.
f Hook in the appliance cover with the heater at the bottom. f
f Click the heater into place using the snap fastener. f
f Secure the appliance cover with the cover fixing screws. f
www.stiebel-eltron.com
10.2.2 tap installation
!

Pressurised connection
f Fit the 3/8 connection hose provided and the 3/8 tee. f
f Install the tap. For this, also observe the tap operating and f
installation instructions.
non-pressurised connection
f Install the tap. For this, also observe the tap operating and f
installation instructions.
Material losses
When making the connections, counter the torque on the
appliance using a size 14 spanner.
DHM | 37