STIEBEL ELTRON DHM 3 Operation And Installation page 36

InstallatIon
Installation
10.2.1 appliance installation
f Mount the appliance on the wall. f
Note
The wall must have a sufficient load-bearing capacity.

f Undo the cover fixing screws by two turns. f
f Undo the snap fastener using a screwdriver. f
f Remove the appliance cover with the heater towards the f
front.
36 | DHM

f Using pliers, break out the knock-out for the power cable

f Use the appliance back panel as a drilling template.
f Secure the appliance back panel to the wall with suitable

f
in the appliance cover. Correct the contours with a file if
necessary.
f
f
rawl plugs and screws.

www.stiebel-eltron.com