Installing Cache Memory - IBM Aptiva Hardware Handbook

Installing cache memory

Before beginning these steps, you may have to remove
installed adapter cards and the drive and bracket
installed in bay 1. For instructions on removing adapter
cards, see page 86. For instructions on removing the
drive and bracket in bay 1, see page 94.
If cache memory modules are not already installed on
your system board, you can install 128K of cache mem-
ory. If cache memory modules are already installed,
your computer has 128K of cache memory.
Read the following instructions before installing
or upgrading cache memory.
To install a cache memory module:
1.
Locate the bank of cache memory module sockets
(Bank 1). Also locate the Tag Address module
socket. (Steps continued on the next page.)
Tag Address
Bank 1
Cache Memory
Module Sockets
Memory Module Sockets
Installing cache memory 109