Table of Contents
Advertisement
Figure 9. Installing additional memory
2. See Figure 9. Remove the two captured screws on each side of the memory
3. Insert the memory card into the brackets at an angle with the connector end
4. Rotate the outer edge of the memory card downward until it snaps into place.
Note: You must remove the back cover if you are replacing both memory modules.
Mounting instructions
You can choose between a table-top, wall mount, or a third party mount.
14
Anyplace Kiosk 4836
All manuals and user guides at all-guides.com
door and pull to remove.
down.
Advertisement
Table of Contents
