04/09 Rev. 5.02-01
AP 5.4 Internal Rewinder
1. Insert the label web, as described further
above (section
Inserting Roll Material
page 6).
2. Thread the end of the label web to the
rewinder (1) as illustrated and fix it with the
clip (2) (fig. 1).
3. Choose the rotation direction of the rewin-
der (face inside or outside): Select para-
meter REWINDER PARA > Rewind
direction.
After switching the printer on, the rewinder
rotates slowly into the set rotation direction,
until the label web is pulled tight.
Possibly, the status message
Status
Rewinder mat. tear
appears, before the web is pulled tight.
If this happens, press the online button to
acknowledge the message (if necessary
several times).
USER MANUAL
AP 4.4 – AP 5.4
on
5004
1
9
Setup