Table of Contents
Advertisement
Safety rules
1.3
Other safety rules
NZA 500-1000
Figure 1.3
! Always keep the reversing valve of the wing folding hydraulic ram closed during transport on
the road or whenever persons are in close proximity to a folded up wing section, e.g. when re-
placing tines. Remove the rod D and move the lever A to the front. See "Figure 1.3", position 0.
! When servicing or repairing the hydraulic system, the wings should be folded down and the
harrow should be lowered onto level, solid ground! Collect any spilled oil.
! When transporting the implement on public roads, show sound judgment and drive carefully.
Prior to transport on public roads in wet conditions, remove dirt that may fall off from both the
tractor and the harrow.
! This machine/implement and the fitted tyres are dimensioned for a maximum speed of
30 km/h on a good country road.
! The owner/driver has sole responsibility for observing local traffic regulations when driving
on a public road.
! Prior to making the hydraulic connections, make sure the male couplings on the harrow and
the female couplings on the tractor are clean and free from dirt.
! To maintain the high level of quality and operational safety of the implement, use only Väder-
stad genuine spare parts. The warranty and any complaint commitments will become void if
other than genuine parts are used.
! Any welding work on the machine/implement should hold professional standard. Incorrect
welding may result in serious injuries or possibly fatal injuries. If in doubt, contact a profes-
sional welding service for proper instructions.
1.4
Location of warning decals on the machine
C
F
A
Figure 1.4
8
D
D
E
B
11.07.2011
ver. 2
Hide quick links:
Advertisement
Table of Contents
