Fitting The Spring For The Reverse-Action Valve - Vaderstad NZ Aggressive NZA 600 Series Original Instructions Manual

Assembly Instructions
2.5

Fitting the spring for the reverse-action valve

Figure 2.5
Applies to NZA 500-1000.
Upon delivery from the factory, the reversing valve spring of the harrow may in some cases not
be installed. Fit the spring as shown in the figure, and lock it in place with the pins.
For valve adjustment, see "3.5 Adjusting the reverse-action valve" on page 24.
16 11.07.2011
ver. 2