Related Manuals for Jaypro Sports WM-48
Summary of Contents for Jaypro Sports WM-48
- Page 1 800-243-0533 www.jaypro.com WALL- MOUNT GOAL SYSTEMS ASSEMBLING INSTRUCTIONS AND O W N E R ’ S MANUAL WM-48 WM-60 Keep this instruction manual in case you have to contact the manufacturer for replacement parts. Rev: A Page 1 of 5...
- Page 2 Required For This Step: 0B 0C 0D 6A 6D 6B 6B 6D 6C STEP 1 (For Concrete or Block Walls) A: Determine where to place the frame (1) on the wall. B: Draw a 21” (533mm) horizontal line on the wall, 88-3/4” (2255mm) up from the playing surface, level the frame (1) horizontally and vertically using a level.
- Page 3 Required For This Step: 8B 8C STEP A: Attach the top of the actuator (6) to the upper mounting bracket (4), using M14x100mm Bolt (14A), a flat washer (14B) and locknut (14C). (Do not over tighten) B: Attach the bottom of the actuator (6) to the actuator arms, using M12x120mm Bolt (8A), a flat washer (8B) and locknut (8C).
- Page 4 Required For This Step: 12A 12B 12C 10B 10C STEP 5 Note: Make sure extension arms are in lowered position. A: Attach the backboard to the both upper and lower extension frames (4 & 5), using four M12x75mm Bolts (10A), eight flat washers (10B) and four locknuts (10C) (do not over tighten).
- Page 5 9.5 ' 9.0 ' 8.5 ' 8.0 ' 7.5 ' STEP 7 A: Position top of rim to 10’ above playing surface using crank handle. Measure distance with a tape measure for accuracy. B: When the crank handle adjusted to the highest point, till you can see the 10’ mark in the stickers. C: Make sure at every installation step you follow when to tighten the fasteners.
Need help?
Do you have a question about the WM-48 and is the answer not in the manual?
Questions and answers