Advertisement
Quick Links
Advertisement
Related Manuals for ZKTeco LH4000
Summary of Contents for ZKTeco LH4000
- Page 1 Installation Instruction 4000 Version:1.0 Date: May 2014...
- Page 2 Diagram and Caution Diagram...
- Page 3 Do not overexert when Do not use electric tool Please wear eye-protection tighten the screws. to tighten the screws. device to protect your eyes when drilling and slotting Inward Outward...
-
Page 4: Installation Step
Installation Step 1. Align the template along the vertical center line of the mortise at the desired handle height, and tape it to the door. Drill the hole on the door. handle centerline desired handle height... - Page 6 4. Install mortise latch plate (C) 3. Install mortise (A) Note: Two Triangles on the mortise must be in horizontal alignment (as the above enlarged figure).
- Page 7 5. Install lock cylinder (E)
- Page 8 6. Install 8x8 spindle (H) and fix outdoor unit (I) Note: Please confirm the two triangles of the mortise be in horizontal position always! As step3 in this installation instruction .
- Page 9 7.Install 8x8 spindle (H) and 5x5 spindle (L), and fix the indoor unit (M)
- Page 10 9. Measure the doorframe for strike 8. Install batteries (N) dimensions and drill the hole...
-
Page 11: Maintenance
Maintenance 10. Test lock 1. Test lock by rotating handle and emergency key. 1. Avoid contacting with corrosive substances. 2. You can use emergency key by removing the cover 2. Do not hang objects on the handle. on the lock cylinder with screwdriver or nails. 3.