Mitsubishi Electric E Series Data Book page 79

5. Wiring Design
<2>Multiple unit control
By setting SW2-6 to ON for address 1, optimum control of number of operating units will be performed.
All units will simultaneously operate when SW2-6 is set to OFF.
(A) System leader unit, group leader unit, and sub unit
Address [1/51]
System leader unit
A
Address [4/54]
Group leader unit
A
(B) System leader unit and group leader unit
*
Address [1/51]
System leader unit
Address 1 SW2-6 ON
A B
*The unit by which the number of devices in the system is controlled
MEES19K040
Address [2/52]
B M1 M2
Address [5/55]
B M1 M2
*
Address [2/52]
Group leader
unit
M1 M2 A B
Address [3/53]
Sub unit Sub unit
M1 M2 M1 M2
Address [6/56]
Sub unit Sub unit
M1 M2 M1 M2
* *
Address [3/53] Address [4/54]
Group leader Group leader
unit unit
A B A B
The unit by which the
number of devices in the
system is controlled
The unit by which the
number of devices in the
system is controlled
* *
Address [5/55] Address [6/56]
Group leader Group leader
unit unit
A B A B
78