Royal Enfield BULLET TRIALS 500 Owner's Manual page 45

WHEEL REMOVAL / ASSEMBLY
NOTE
Ensure the brake disc is located in between the brake
pads.
 Align the caliper bracket, wheel and swing arm
holes all are in one line.
Insert and tap the rear wheel

axle gently from left side.
C A U T I O N
Do not force the spindle into the wheel as the threads
may get damaged. Tap it through the wheel gently.
Note the alignment index

marks in the both side of
swing arm.
Fix the brake hose pipe in

swing arm clips properly.
C A U T I O N
Please check the brake hose pipe routing from
Reservoir to Master cylinder, Master cylinder to Rear
wheel caliper.
There should not be any twist or pinch in routing which
may affect braking performance.
W A R N I N G
Index mark
Ensure the motorcycle does not come off center stand
while assembling / disassembling the wheel assembly.
Failure to adhere could result in damage or serious
Swing Arm Reference
injury.
Mark
44