WARNING INDICATIONS & SAFETY SYSTEMS
4. ROLL OVER SENSOR
In the event of motorcycle falling over on eitherof its
sides with the engine running and the gears engaged
the Roll over sensor will "disable" both the ignition and
fuel systems and switch 'OFF' the engine. This is to
prevent any damage to the motorcycle and its rider.
To reset the Roll over sensor and reactivate the ignition
and fuel systems.
Ensure the motorcycle is made upright and is on
its center stand.
Ensure gears are in correct neutral and the
neutral lamp is glowing in the instrument console.
Switch OFF both ignition & stop switches, wait for a
few seconds and switch ON the Ignition and stop
switch again, to start the engine.
33