Royal Enfield BULLET TRIALS 500 Owner's Manual page 3

NOTICE
All information in this manual is based on the latest product information available at the time of publication.
Due to continuous improvements, there may be discrepancies between the information in this manual and your
motorcycle. Royal Enfield reserves the right to make production changes at any time without prior notice and
without incurring any obligation to make the same or similar changes to motorcycles previously built or sold.
All images shown are for reference to explain and need not to be exactly the same on the model you own.
Technical specifications are subject to change without prior notice.
"© Copyright 2019 Royal Enfield (A unit of Eicher Motors Ltd.). All Rights Reserved. No part of this manual shall be
copied, distributed or otherwise dealt without the express permission in writing of Royal Enfield".
Disclaimer
Applicable for all Matt finish motorcycles
1. Do not polish matt finished paint surfaces in your motorcycle as it will increase the
gloss level.
2. Wash the painted parts only with plain water and do not use any strong solvents,
cleaning agents or detergents.
3. Scratches, if happens on the matt finish parts cannot be touched up and corrected
/ removed
4. Warranty is not applicable for any matt finished painted parts of the motorcycle.
5. The Heat Resistance Coated components such as silencer pipe, exhaust etc... shall
not be wiped clean with oiled cloth as it can generate smoke when the vehicle is
driven and also leave patch marks.
Part No. RAM00069/A / Qty. 200 / Mar. '19
2