Royal Enfield BULLET TRIALS 500 Owner's Manual page 15

TECHNICAL SPECIFICATIONS
CHASSIS
Frame ....................... Single Down Tube, using
............................ engine as stressed member
Suspension
Front ................... Telescopic, 35mm forks,
............................ 130mm travel
Rear ................... Twin gas charged shock-
............................ absorbers with 5-step adjustable
............................ preload, 80mm travel.
Brakes ...................... Hydraulic Disc Brakes Front
............................ & Rear with ABS System
Front: ................. 280 mm dia disc with twin
............................ piston caliper
Rear: .................. 240 mm dia disc with single
............................ piston & floating caliper
Tyre size
Front ................... 90 / 90 - 19" - 52 P
Rear ................... 110 / 80 - 18" - 58 P
Tyre Pressure
Front ................... 20 psi/1.41 kg/cm
Rear ................... 30 psi/2.11 kg/cm
Steering lock ........... In built
Fuel tank capacity . 13.5 litres approx.*
Low fuel warning ... 3.5 litres (approx)
Dead stock of Petrol 0.75 litres (approx)
(unusable fuel)
* The above values are approximate and the actual fuel filling
capacity will vary from the values mentioned.
ELECTRICALS
Generation .............. Alternator (III Phase)
System : E-Start ...... 12V - DC (III Phase)
Battery : E-Start ...... 12V, 12AH MF
Head lamp .............. 12V, H4-60/55W (Halogen)
Position Lamp .......... 12V, 4W
Brake/Tail lamp ..... 12V, P21/5W
14
2
2