Royal Enfield BULLET TRIALS 500 Owner's Manual page 43

WHEEL REMOVAL / ASSEMBLY
Locate stepped spacer in the left side of the hub

with its larger face outside.
Locate front wheel between the fork ends duly

ensuring the spacer and the speedo drive do not
fall off and the brake disc is correctly positioned
between the brake pads.
Ensure the peg in the

speedo drive is correctly
positioned in the slot in the
right side fork end.
Insert axle through the right side fork end and gently
tap it in fully.
Locate washer and nut on

the left side.
 Hold the axle from the right
side and tighten nut on left
side to a torque of 7 KgM
(70 Nm).
Hold the pinch bolt and

tighten the U-Nut on the
right side fork end.
 Rotate the wheel and check for smooth rotation.
Connect the speedo cable to speedo drive and

check for proper working of speedo meter.
Depress brake lever 2 or 3 times to check front

brake efficiency.
42